15 Year Heater Warranty*

Vastex Little Red X3D-30

With special BOOST zone for DTG Digital Inks
Code: LR-X3D-30
  • £7,100.00
  • RRP £7,100.00
Available   |   Usually dispatched within 24 hours
Free Next Day Delivery (UK Mainland Only) On Consumable orders over £250 when ordered before 3pm
Vastex Green

Production Data:

  • 360+ garments/hr for plastisol inks
  • 130+ garments/hr for water-based or discharge inks
  • 45+ garments/hr for DTG digital ink @ 3.5 minutes

The all-new multi-purpose LittleRed™ X3-D infrared dryer cures direct-to-garment (DTG) printed textiles as well as plastisol, water-based and discharge-printed garments at higher rates than possible with conventional dryer designs.

It features a high-powered pre-heating zone that rockets ink temperatures past 300°F (149ºC) within the first several inches of the heating chamber, maximising the distance and dwell time for optimum curing of any ink, allowing increased conveyor belt speeds and dryer output.

The Little Red X3-D model is equipped with a 30" (76.2 cm) wide conveyor belt and three 24" (61 cm) wide infrared heaters designed to cure 360+ plastisol-printed garments/hour, 130+ water-based or discharge-printed garments/hour, and up to 45+ DTG printed garments/hour.

With an overall conveyor belt length of 88" (224 cm) combined with a 41" (104 cm) long heating chamber, the X3-D features a powerful 380 cfm targeted exhaust system as standard to rapidly remove moisture and air contaminates from the heating chamber, as well as to cool the outer skin and controls.

Capacity can be expanded as needs grow by adding optional modular heating chamber(s) and/or longer conveyor belts. 

Standard features include:

  • FLEXIBLE - Can cure plastisol, water-based, discharge and DTG inks in record time
  • EFFICIENT - Closely spaced coils provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing
  • DEPENDABLE - Industry-leading 15-year heater warranty
  • ACCURATE - Digital PID Temperature controller is accurate to +/-1°F
  • CONSISTENT - Low friction belt aligner and DC belt speed control with digital display
  • HEAVY DUTY - "X-Series" Conveyor Belt Tracking System with Teflon coated fiberglass belt
  • ADJUSTABLE - From 2 - 7 in. (5 - 18 cm) belt-to-heater element clearance
  • EXHAUST - High powered exhaust to remove fumes and moisture
  • EXPANDABLE - Add oven chambers and/or belt extensions as your business grows

Options available:

  • Additional heating chambers and conveyor belt extensions
  • Heavy duty belt motor (recommend for longer conveyor belts)
  • Locking casters for mobility

Please click here for our Delivery & Returns Policy

Please click here for our Payment & Security policy.